Automotive Double Station Sheet Metal Prep Station Spray Line Booth

Model NO.: YS-5-C

Heating Mode: Diesel

Paint Mist Treatment: Dry-type

Condition: New

Ventilation: Cross-Flow Type

Heating: Riello G20 Diesel Burner

Voltage: 1X220V, 3X380V, Your Special Voltages Are Accepted

Port: Huangpu Port or by Your Order

Main Product: Spray Booth, Prep Station, Infrared Curing System

Trademark: YOKISTAR

Transport Package: Bubble Film Packing for Sea Transportation in Bulk

Specification: 20′GP can load 1 set, 40′GP 2 sets, 40`HQ 3 sets

Origin: Guangzhou, China

HS Code: 84198990

Model NO.: YS-5-C

Heating Mode: Diesel

Paint Mist Treatment: Dry-type

Condition: New

Ventilation: Cross-Flow Type

Heating: Riello G20 Diesel Burner

Voltage: 1X220V, 3X380V, Your Special Voltages Are Accepted

Port: Huangpu Port or by Your Order

Main Product: Spray Booth, Prep Station, Infrared Curing System

Trademark: YOKISTAR

Transport Package: Bubble Film Packing for Sea Transportation in Bulk

Specification: 20′GP can load 1 set, 40′GP 2 sets, 40`HQ 3 sets

Origin: Guangzhou, China

HS Code: 84198990

Product Details
**Model:YS-5-C
**Inside dimention:6300*3450*2700mm(L*W*H) Ps: For one of the booth
**Any Size Requirements Can Be Met.
**with plenum,intake and exhaust air fan.
**CE certificate approval.


Products Advantages
 
Fast, Semi-Automatic Operation
Quickly and easily position the unit to automatically move based on specifications set into the control panel. There is no need to scan a vehicle or use special plates or markers.
Up to 80% More Paint Shop Throughput
The moveable curing lamp system to offer the fastest curing time in the industry for both prep and paint processes.It shortens repair cycle time and significantly reduces rework.Plus,it easily installs within existing shop foot prints.
Saves Time & Money
Cures both filler and coatings from the inside out. IR technology creates a high-quality cure using significantly less energy and reduces the out-of-dust time to just minutes. The ability to turn the lamps on and off helps save on energy and operating costs.
Quick Heating & Cooling Times
The system can be turned on only when needed and is safe to touch shortly after being turned off.
 
Generation Introduction
The automotive sheet-metal curing system consists of the paint booth,drying oven and prep station,the whole process from the pre-treatment to the curing is finished well within this painting line.The cost can be save a lot for workshops.It widely used in car workshops and high end 4S shop.YOKISTAR as the designated brand for BMW 4S shop,it wins a high reputation in the industry.The lines consists of the spray booth,curing booth,floor rail and the removeable trolley,It can be optionally mounted with the prep station,infrared painting curing lamp and drying machine.

Conveying & Storage 
As prep station are in big size, they're conveyed in bulk while loading and unloading. The parts in frame should be loaded and unloaded by fork vehicles while the small parts are conveyed by manpower. Be noticed to make sure that the parts are not damaged and dilapidated in the loading and unloading process.

The finished parts of prep station are usually stored in the finished products warehouse, and marked on the outside packages for checking before delivery. After being sent to the destination, all the parts should not be put in the open air but in store house to prevent from rusting and oxidized by the moisture.

Warranty
The goods are guaranteed for 24 months from the date of receipt, but the filters and lamps are not guaranteed. It cannot be applied for damages caused by negligence of operations or mishandling of the machine.

YOKISTAR Products
High quality and advanced technology are applied in YOKISTAR product ranges, involving automotive spray booth, bus and truck spray booth, prep station, mixing room, bench spray booth, open face spray booth and infrared curing lamp.Custom Design paint booth is our super advantage.



Specification Of YS-5-C

Outside Dimension	7550×3550×3100mm(L×W×H)
Inside Dimension	6300×3450×2700mm(L×W×H)
    Plenum Dimension	6300×3450×400mm(L×W×H)
Room Body	Back side with 50mm EPS wall panels, the other 3 sides with PVC curtains
Lighting System	Ceiling lights 8units×4pcs=32pcs 36W, with electronic ballasts ,5.0mm clear tempered glass
Generator Setting	Exhaust air from rear side; galvanized steel molding frame , white coated steel cover
Intake And Exhaust Air System	5.5KW double intake centrifugal fan for intake air, 5.5KW double intake centrifugal fan for exhaust air, model YDW-4.5S, air capacity is 15500 m 3 /h, with manual damper for exhaust air
Heating System	RIELLO G10 oil burner, stainless steel heat exchanger. Max. heating productivity: 100000 Kcal/h.
Filter System	Pre-filter, high efficiency filter, exhaust fiberglass filter.
Roof Plates	Galvanized steel plates
Control System	Fan operation switch, lighting switch, temperature controller, emergency stop
Setting Style	Suspending steel hook from roof of building or steel column supporting;

 

  Product Details
**Model:YS-5-C
**Inside dimention:6300*3450*2700mm(L*W*H) Ps: For one of the booth
**Any Size Requirements Can Be Met.
**with plenum,intake and exhaust air fan.
**CE certificate approval.


Products Advantages
 
Fast, Semi-Automatic Operation
Quickly and easily position the unit to automatically move based on specifications set into the control panel. There is no need to scan a vehicle or use special plates or markers.
Up to 80% More Paint Shop Throughput
The moveable curing lamp system to offer the fastest curing time in the industry for both prep and paint processes.It shortens repair cycle time and significantly reduces rework.Plus,it easily installs within existing shop foot prints.
Saves Time & Money
Cures both filler and coatings from the inside out. IR technology creates a high-quality cure using significantly less energy and reduces the out-of-dust time to just minutes. The ability to turn the lamps on and off helps save on energy and operating costs.
Quick Heating & Cooling Times
The system can be turned on only when needed and is safe to touch shortly after being turned off.
 
Generation Introduction
The automotive sheet-metal curing system consists of the paint booth,drying oven and prep station,the whole process from the pre-treatment to the curing is finished well within this painting line.The cost can be save a lot for workshops.It widely used in car workshops and high end 4S shop.YOKISTAR as the designated brand for BMW 4S shop,it wins a high reputation in the industry.The lines consists of the spray booth,curing booth,floor rail and the removeable trolley,It can be optionally mounted with the prep station,infrared painting curing lamp and drying machine.

Conveying & Storage 
As prep station are in big size, they're conveyed in bulk while loading and unloading. The parts in frame should be loaded and unloaded by fork vehicles while the small parts are conveyed by manpower. Be noticed to make sure that the parts are not damaged and dilapidated in the loading and unloading process.

The finished parts of prep station are usually stored in the finished products warehouse, and marked on the outside packages for checking before delivery. After being sent to the destination, all the parts should not be put in the open air but in store house to prevent from rusting and oxidized by the moisture.

Warranty
The goods are guaranteed for 24 months from the date of receipt, but the filters and lamps are not guaranteed. It cannot be applied for damages caused by negligence of operations or mishandling of the machine.

YOKISTAR Products
High quality and advanced technology are applied in YOKISTAR product ranges, involving automotive spray booth, bus and truck spray booth, prep station, mixing room, bench spray booth, open face spray booth and infrared curing lamp.Custom Design paint booth is our super advantage.



Specification Of YS-5-C

Outside Dimension	7550×3550×3100mm(L×W×H)
Inside Dimension	6300×3450×2700mm(L×W×H)
    Plenum Dimension	6300×3450×400mm(L×W×H)
Room Body	Back side with 50mm EPS wall panels, the other 3 sides with PVC curtains
Lighting System	Ceiling lights 8units×4pcs=32pcs 36W, with electronic ballasts ,5.0mm clear tempered glass
Generator Setting	Exhaust air from rear side; galvanized steel molding frame , white coated steel cover
Intake And Exhaust Air System	5.5KW double intake centrifugal fan for intake air, 5.5KW double intake centrifugal fan for exhaust air, model YDW-4.5S, air capacity is 15500 m 3 /h, with manual damper for exhaust air
Heating System	RIELLO G10 oil burner, stainless steel heat exchanger. Max. heating productivity: 100000 Kcal/h.
Filter System	Pre-filter, high efficiency filter, exhaust fiberglass filter.
Roof Plates	Galvanized steel plates
Control System	Fan operation switch, lighting switch, temperature controller, emergency stop
Setting Style	Suspending steel hook from roof of building or steel column supporting;

 

 

Alloy Wheel Repair Lathe

Alloy Wheel Repair Lathe,Diamond Cut Wheels ,Alloy Wheel Diamond Cutting Machine,CNC Wheel Lathe

CNC Machine Tools Co., Ltd. , http://www.nblathemachine.com