Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

Model NO.: BOSJ-S
Origin: Jiangsu
HS Code: 8455212000
Model NO.: BOSJ-S
Origin: Jiangsu
HS Code: 8455212000
Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine
1,Unit performance
 
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
 
The width of material: 250≤§≤520
 
Product speed: 0-8m/min
 
Occupy groud area:  length 30m xwidth 3m
 
Total power: about 62kw
 
2,Equipment structure
 
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
 
3,Each part main parameter:
 
3,1 Passived Decoiler 
Decoiler: decoiler,  Inner expanding type,  capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
 
3,2 Leveler
Motor: 7.5KW  Frequency conversion motor
 
3,3 Servo Feeding machine
Drive: 4 kw  Servo motor
 

3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov,  Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
 
3,5 Forming machine
Rack: cast iron frame,  
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment  
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power:  30KW Frequency conversion motor ZQ500 reducer
Drive type:  every rack has one gear power distribution box.
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

3,6 Hydraulic cutting
Hydraulic pressure cutting 
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece


 
3,7 Electronic controlling: PLC 
 
 
Main Machine Parameter
No. Item Unit Data Remark

1 		Raw material Type   MS\galvanized sheet  
Strength of panel Map ≥350  
Thickness of panel mm 1.2~2.0  
2 Size mm See figure  
3 Speed m/min 6~8  
4 Material of roller   GCr15Hardening treatment  
5 Drive type   Gear box  
6 Total power kw About 45  
7 Electrical system   PLC Inverter control  
8 Contour dimension(L*W*H) m 35X4X3.9  
 
Delivery of machine


Related Products
The details of the scaffolding machine
NO. CONTENTS
1 Scaffolding plank standing tube welding device
2 Scaffolding plank ledger welding device
 
3		  
Punching Device		 Full automatic punching device
Semi-automatic punching device
Manual punching device
Spare part:punching mould
 
4		  
diagonal brace flattening &punching device		 Full automatic diagonal brace flattening &punching device
Semi automatic  diagonal brace flattening &punching device
Manual  diagonal brace flattening &punching device
Spare part:punching mould
 
5		  
Tube cutting machine		 Auto Blade cutting Device
Swing saw cutting device
Direct saw cutting device
Auto direct saw cutting device
6 Auto Scaffolding plank wedling line Auto robot welding
Auto robot hand welding
7 Base jack & U-head jack welding device
8 Auto scaffolding plank roll forming machine

Introductions of the scaffolding machine
1. Scaffolding plank standing tube welding device
 Equipment function:
It is mainly used in auto seam welding for steel tubular scaffold pipe and disk plate, it also can add
Main Parameter:
Length:1-3m
Tube diameter:¢48mm &¢60mm
Disk plate quantity:1-6 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 13 sets inveter gas welding device and special device
More standing tube choices:
 
 

 
2. Scaffold ledger welding device
Equipment function:
  It is mainly used in auto seam welding for steel tubular scaffold ledger wedge head and tube.
Main Parameter:
Length:0.5-3m
Tube diameter:¢48mm
Welding quantity:2 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 2 sets inveter gas welding device and special device
More ledger choices:
 
 
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

 
3. Scaffold tube punching device
Equipment function:
   It is mainly used in punching holes for standing tube ends
Basic parameter:
Length: 1-3m
Tube diameter:¢48mm&¢60mm
Length tolerance: ≤0.5mm
Basic component:
It consists of auto feeding system, seam positioning system (it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 
4. diagonal brace flattening &punching device
Equipment function:
It is mainly used in flattening &punching for diagonal brace both ends
Basic parameters:
Length:0.5~3m
Tube diameter:¢33mm or ¢48mm
Length tolerance:≤0.5mm
Basic component: It consists of auto feeding system, seam positioning system(it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

5.Tube Cutting Machine
Main function:
It is mainly used tube cutting
Basic parameter:
Length:0.6~3m
Tube diameter:¢33m,¢48mm and ¢60mm
Length tolerance:≤0.5mm

Auto Blade cutting device:
 
Saw tube cutting device:
 
6.Auto scaffold welding device
 
Main function:
It is mainly used in auto welding for scaffold end cap and stiffener
Basic parameter:
Length:0.6-3m
Length tolerence:≤1mm
Basic component:
No. Name Type Quanti. Remark
1 Welding robot hand 4200X650X500 1 Double welding head
2 Welding power supply(optional) MAGMEET350 2 Supplied by buyer
3 Working clamp   2  
4 positioner   2 optional
5 Moving rail and parts 13m 1  
6 Electric control system   1  
 
 
 Adjustment screw welding device
 
Equipment function:
It is mainly used in welding for scaffolding base and U-head jack screw.
Basic parameter:
Length:0.3-1.0m
Length tolerance:≤0.5mm
Basic component: It consists of welding device and special device.
 
 
  Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine
1,Unit performance
 
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
 
The width of material: 250≤§≤520
 
Product speed: 0-8m/min
 
Occupy groud area:  length 30m xwidth 3m
 
Total power: about 62kw
 
2,Equipment structure
 
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
 
3,Each part main parameter:
 
3,1 Passived Decoiler 
Decoiler: decoiler,  Inner expanding type,  capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
 
3,2 Leveler
Motor: 7.5KW  Frequency conversion motor
 
3,3 Servo Feeding machine
Drive: 4 kw  Servo motor
 

3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov,  Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
 
3,5 Forming machine
Rack: cast iron frame,  
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment  
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power:  30KW Frequency conversion motor ZQ500 reducer
Drive type:  every rack has one gear power distribution box.
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

3,6 Hydraulic cutting
Hydraulic pressure cutting 
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece


 
3,7 Electronic controlling: PLC 
 
 
Main Machine Parameter
No. Item Unit Data Remark

1 		Raw material Type   MS\galvanized sheet  
Strength of panel Map ≥350  
Thickness of panel mm 1.2~2.0  
2 Size mm See figure  
3 Speed m/min 6~8  
4 Material of roller   GCr15Hardening treatment  
5 Drive type   Gear box  
6 Total power kw About 45  
7 Electrical system   PLC Inverter control  
8 Contour dimension(L*W*H) m 35X4X3.9  
 
Delivery of machine


Related Products
The details of the scaffolding machine
NO. CONTENTS
1 Scaffolding plank standing tube welding device
2 Scaffolding plank ledger welding device
 
3		  
Punching Device		 Full automatic punching device
Semi-automatic punching device
Manual punching device
Spare part:punching mould
 
4		  
diagonal brace flattening &punching device		 Full automatic diagonal brace flattening &punching device
Semi automatic  diagonal brace flattening &punching device
Manual  diagonal brace flattening &punching device
Spare part:punching mould
 
5		  
Tube cutting machine		 Auto Blade cutting Device
Swing saw cutting device
Direct saw cutting device
Auto direct saw cutting device
6 Auto Scaffolding plank wedling line Auto robot welding
Auto robot hand welding
7 Base jack & U-head jack welding device
8 Auto scaffolding plank roll forming machine

Introductions of the scaffolding machine
1. Scaffolding plank standing tube welding device
 Equipment function:
It is mainly used in auto seam welding for steel tubular scaffold pipe and disk plate, it also can add
Main Parameter:
Length:1-3m
Tube diameter:¢48mm &¢60mm
Disk plate quantity:1-6 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 13 sets inveter gas welding device and special device
More standing tube choices:
 
 

 
2. Scaffold ledger welding device
Equipment function:
  It is mainly used in auto seam welding for steel tubular scaffold ledger wedge head and tube.
Main Parameter:
Length:0.5-3m
Tube diameter:¢48mm
Welding quantity:2 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 2 sets inveter gas welding device and special device
More ledger choices:
 
 
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

 
3. Scaffold tube punching device
Equipment function:
   It is mainly used in punching holes for standing tube ends
Basic parameter:
Length: 1-3m
Tube diameter:¢48mm&¢60mm
Length tolerance: ≤0.5mm
Basic component:
It consists of auto feeding system, seam positioning system (it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 
4. diagonal brace flattening &punching device
Equipment function:
It is mainly used in flattening &punching for diagonal brace both ends
Basic parameters:
Length:0.5~3m
Tube diameter:¢33mm or ¢48mm
Length tolerance:≤0.5mm
Basic component: It consists of auto feeding system, seam positioning system(it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 Galvanized Ringlock Scaffolding Base Collar Welding Machine Factory

5.Tube Cutting Machine
Main function:
It is mainly used tube cutting
Basic parameter:
Length:0.6~3m
Tube diameter:¢33m,¢48mm and ¢60mm
Length tolerance:≤0.5mm

Auto Blade cutting device:
 
Saw tube cutting device:
 
6.Auto scaffold welding device
 
Main function:
It is mainly used in auto welding for scaffold end cap and stiffener
Basic parameter:
Length:0.6-3m
Length tolerence:≤1mm
Basic component:
No. Name Type Quanti. Remark
1 Welding robot hand 4200X650X500 1 Double welding head
2 Welding power supply(optional) MAGMEET350 2 Supplied by buyer
3 Working clamp   2  
4 positioner   2 optional
5 Moving rail and parts 13m 1  
6 Electric control system   1  
 
 
 Adjustment screw welding device
 
Equipment function:
It is mainly used in welding for scaffolding base and U-head jack screw.
Basic parameter:
Length:0.3-1.0m
Length tolerance:≤0.5mm
Basic component: It consists of welding device and special device.
 
 
 

Lever Hoists fall into two main categories: cable or rope hoists and chain hoists. Both variants rely on a ratchet and pawl system to rotate a gear or pulley a pre-set distance that lifts the load. The ratchet and lever mechanism is equipped with a hook or fastener which is used to suspend the lever hoist from a suitable support. Both lever hoist types may be used in any orientation for lifting, tensioning, or pulling operations although chain type hoists are generally more suited to vertical lifting.

WinnerLifting provides all kinds of hoists and accessories,which have bring us lots of great business partners and good reputation.

And,we are looking for more,you'll find a great supplier while you join the party!

Let's take the market together!

Lever Hoists

Jet Lever Hoist,Manual Lever Hoist,Ratchet Lever Hoists,Lever Block Chain Hoist

WINNERLIFTING(H.K.)INT'L TRADING LIMITED. , https://www.ratchetstrap.de

May 07, 2020