Bucket Teeth of excavators are important parts of excavators, similar to human teeth, but also vulnerable parts. They are combined bucket teeth composed of tooth seats and tooth tips, which are connected by a pin shaft. Because the part of bucket tooth wear and failure is the tooth tip, just replace the tooth tip.
The most commonly used imported excavators in the market are: Cat, Komatsu PC200-7, Hitachi, Daewoo, Kobelco, Hyundai, etc. Commonly used domestic excavators are: Liugong Excavator Bucket with tooth, SDLG wheel loader bucket with tooth, XCMG ZL50C loader and excavator bucket with tooth, Lovol Wear Resisting Bucket, Lonking bucket , SEM, Sany Heavy Industry, Shantui XGMA, Chenggong, Sunward Intelligent, Zoomlion, etc.We offer Custom Bucket tooth and teeth parts.
One: The bucket tooth material is low-alloy wear-resistant steel, which is more suitable for bucket teeth. However, due to the lack of necessary heat treatment, the organization of the bucket teeth is uneven, the insert does not play its due role, and the overall wear resistance of the bucket teeth is poor, leading to early failure. Two: It is recommended to properly normalize the casting after casting to improve the structure and performance and increase the service life. After reasonable heat treatment of the casting, under the same working conditions, the service life of the bucket teeth is increased by nearly 2 times.
Teeth Custom Teeth,Zl50C Bucket Tooth,Wheel Loader Adapter,Loader Teeth Parts Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com
Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model
Y83W-5000
nominal forceÂ
5000kn
briquette diameter
D120 (customized)
briquette density
≥ 5.5t/m³
briquette weight
5~7kg
productivity
3block/min
output in one shift
8~10t/8h
total power
30kw*2
machine weight
about 11ton
overall dimension
host machine: 4500*2050*2350mm
oil tank: 1950*1500*1360mm
Â
: D
Do you work with steel in your manufacturing facility? Whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, a steel briquette machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle. It can also squeeze out the liquids from your scraps.
We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.
Â
model
Y83W-5000
nominal forceÂ
5000kn
briquette diameter
D120 (customized)
briquette density
≥ 5.5t/m³
briquette weight
5~7kg
productivity
3block/min
output in one shift
8~10t/8h
total power
30kw*2
machine weight
about 11ton
overall dimension
host machine: 4500*2050*2350mm
oil tank: 1950*1500*1360mm
Â
: D
Model NO.: Y83W-5000
Application: Steel, Copper, Metal, etc.
Operation: PLC Automatic
Briquette Diameter: D120mm (Customized)
Briquette Height: 10~12cm
Output: 8~10t/8h
Power: 30kw*2
Cooler: Air Chiller
Color: Customized
Worker: Just Need One
Trademark: ShengBo
Transport Package: in Nude
Specification: fully-automatic
Origin: Jiangsu, China
HS Code: 8462919000
Model NO.: Y83W-5000
Application: Steel, Copper, Metal, etc.
Operation: PLC Automatic
Briquette Diameter: D120mm (Customized)
Briquette Height: 10~12cm
Output: 8~10t/8h
Power: 30kw*2
Cooler: Air Chiller
Color: Customized
Worker: Just Need One
Trademark: ShengBo
Transport Package: in Nude
Specification: fully-automatic
Origin: Jiangsu, China
HS Code: 8462919000
Contact us! We would like to tell you more about our steel briquetting system.
Contact us! We would like to tell you more about our steel briquetting system.