Cement Bucket Elevator/Chain Plate Bucket Elevator

Model NO.: NE
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Capacity: as Request
Belt Speed: as Request
Lifting Height: as Request
Power: as Per The Model
Belt Type: Neylon/Rubber/Steel
Bucket Number: as The Capacity
Bucket Material: PE/Carbon Steel/Stainless Steel
Trademark: PK
Specification: CE, SGS, ISO, BCC
Origin: Henan, China (Mainland)
HS Code: 8428320000
Model NO.: NE
Warranty: 1 Year
Color: Multi Color
Customized: Customized
Condition: New
Capacity: as Request
Belt Speed: as Request
Lifting Height: as Request
Power: as Per The Model
Belt Type: Neylon/Rubber/Steel
Bucket Number: as The Capacity
Bucket Material: PE/Carbon Steel/Stainless Steel
Trademark: PK
Specification: CE, SGS, ISO, BCC
Origin: Henan, China (Mainland)
HS Code: 8428320000
Introduction
It is designed for transporting vertically for granular, powder and small block of grinding suction smaller disperses the shape material. It adopts belt as the traction component , can reach to max.40 meters . Capacity could be approx. 4~238m3/h .

Working Principle
The bucket is filled with material and is conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the parabolic design. The driving device drives pulley to operate the bucket belt in circular motion from bottom to up. After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted up to do parabolic motion such repeated cycle. The material is lifted from bottom to the top to the specified height to reach conveying vertically.
Features
    1.Smooth transmission - no impact caused due to the traction member
    2.Less noise pollution - good sealing sound system
    3.Greater conveying speed due to smooth transmission
    4.Longer life span
    5.Low cost compared with
other conveyor for powder materials.

Advantages

    1.Uses 1 to 4 rows of closely spaced heavy duty seamless steel buckets
    2.Designed steel cord high temperature elevator belt.
    3.Capable of belt speed up to 2.3 m/s
    4.Achieve far greater capabilities per case size then chain (up to double times)
    5.Saves 33% of components costs
    6.Much lower capital investment
    7.Belt wear less than chain
    8.Reduced maintenance and spares cost
    9.Reduces down time and maintenance costs
    10.Throughputs up to 1300 TPH and over

Application
    The vertical belt bucket elevator is widely used in mining , metallurgy , chemicals , power plant , agriculture and quarry etc industries for handling products such as cement, raw meal, alumina, coke, foundry sand, wood chips and other materials.
Maintenance
    A general belt bucket elevator inspection every six months, mainly on the hopper and belt tightening bolt joints check processing, tightening or replacing bolts. Each belt test once a year to confirm the age of the plastic surface of the belt and the belt strength. Adjust the level of the cylinder head and tail roller to correct the belt deviation. If the deviation is caused by drum plastic surface wear, re-roll the car hanging plastic and rubber surfaces. The rear bearing need to regularly check. Generally, after a long time usage, it will cause wear on slip ring seal. This can cause the bearing oil drip and caused bearing damage. Generally, a good slip ring seal can be used for many years.
    A.Check belt for tears, cuts and etc
Sudden signs of unusual damage call for immediate action.
    B.Check cups for loose or missing bolts
A loose dangling cup is the necessary lever to start a busted belt rip.
    C.Replace belt cups
Cups with a pronounced forward bend hold the belt in a vertical arc, which is a contradiction of forces. When the belt is bent in a horizontal arc around the pulleys, this will cause lengthwise cracks to appear at the bolt holes.
    D.Check belt tension
This is a possible source of drive slippage and excessive wear. Belts running loose in a leg are put to severe flex due to lack of full contact with the boot pulley. A loose belt may swing causing the cups to catch and tear the belt.
    E.Check alignment 
Belts not running true due to out-of-plumb pulleys, idlers or casing cause edge wear and pave the way for costly accidents. 
    F.Check slippage on drive pulleys
Proper lagging of pulleys can increase efficiency and belt life appreciably.
    G.Check bucket elevators for uneven loading
This can cause the belt to crawl across the head pulley and cause edge wear or break the belt fabric.
    H.Check boot for water
A belt allowed to sit in water will rot and tear very easily.
    I.Check discharge throat
The throat to the down leg should be closed as much as possible with a piece of rubber belting adjusted close to the cups. This will prevent back legging.
 Parameters
 
Model Capacity
(m3/h)

Max.

Particle

Size (mm)

Bucket

Volume (L)

Bucket

Width (mm)

Bucket

Pitch (mm)

Bucket

Speed (m/s)

Max. Lifting

Height (m)

NE15 15 40 2.5 250 203 0.5 35
NE30 32 55 7.8 300 305 50
NE50 60 60 15.7 300 305 45
NE100 110 70 35 400 400 45
NE150 170 90 52.2 600 400 45
NE200 210 100 84.6 600 500 40
NE300 320 125 127.5 600 500 40
NE400 380 130 182.5 700 600 40
NE500 470 140 260.9 700 700 30
NE600 600 150 330.2 700 700 30
NE800 800 165 501.8 800 800 30

Introduction
It is designed for transporting vertically for granular, powder and small block of grinding suction smaller disperses the shape material. It adopts belt as the traction component , can reach to max.40 meters . Capacity could be approx. 4~238m3/h .

Working Principle
The bucket is filled with material and is conveyed to the head terminal, and then the material is thrown from the outlet under the action of centrifugal force according to the parabolic design. The driving device drives pulley to operate the bucket belt in circular motion from bottom to up. After discharging, the empty bucket is back to the boot by conveying and be filled again, and then lifted up to do parabolic motion such repeated cycle. The material is lifted from bottom to the top to the specified height to reach conveying vertically.
Features
    1.Smooth transmission - no impact caused due to the traction member
    2.Less noise pollution - good sealing sound system
    3.Greater conveying speed due to smooth transmission
    4.Longer life span
    5.Low cost compared with other conveyor for powder materials.

Advantages

    1.Uses 1 to 4 rows of closely spaced heavy duty seamless steel buckets
    2.Designed steel cord high temperature elevator belt.
    3.Capable of belt speed up to 2.3 m/s
    4.Achieve far greater capabilities per case size then chain (up to double times)
    5.Saves 33% of components costs
    6.Much lower capital investment
    7.Belt wear less than chain
    8.Reduced maintenance and spares cost
    9.Reduces down time and maintenance costs
    10.Throughputs up to 1300 TPH and over

Application
    The vertical belt bucket elevator is widely used in mining , metallurgy , chemicals , power plant , agriculture and quarry etc industries for handling products such as cement, raw meal, alumina, coke, foundry sand, wood chips and other materials.
Maintenance
    A general belt bucket elevator inspection every six months, mainly on the hopper and belt tightening bolt joints check processing, tightening or replacing bolts. Each belt test once a year to confirm the age of the plastic surface of the belt and the belt strength. Adjust the level of the cylinder head and tail roller to correct the belt deviation. If the deviation is caused by drum plastic surface wear, re-roll the car hanging plastic and rubber surfaces. The rear bearing need to regularly check. Generally, after a long time usage, it will cause wear on slip ring seal. This can cause the bearing oil drip and caused bearing damage. Generally, a good slip ring seal can be used for many years.
    A.Check belt for tears, cuts and etc
Sudden signs of unusual damage call for immediate action.
    B.Check cups for loose or missing bolts
A loose dangling cup is the necessary lever to start a busted belt rip.
    C.Replace belt cups
Cups with a pronounced forward bend hold the belt in a vertical arc, which is a contradiction of forces. When the belt is bent in a horizontal arc around the pulleys, this will cause lengthwise cracks to appear at the bolt holes.
    D.Check belt tension
This is a possible source of drive slippage and excessive wear. Belts running loose in a leg are put to severe flex due to lack of full contact with the boot pulley. A loose belt may swing causing the cups to catch and tear the belt.
    E.Check alignment 
Belts not running true due to out-of-plumb pulleys, idlers or casing cause edge wear and pave the way for costly accidents. 
    F.Check slippage on drive pulleys
Proper lagging of pulleys can increase efficiency and belt life appreciably.
    G.Check bucket elevators for uneven loading
This can cause the belt to crawl across the head pulley and cause edge wear or break the belt fabric.
    H.Check boot for water
A belt allowed to sit in water will rot and tear very easily.
    I.Check discharge throat
The throat to the down leg should be closed as much as possible with a piece of rubber belting adjusted close to the cups. This will prevent back legging.
 Parameters
 
Model Capacity
(m3/h)

Max.

Particle

Size (mm)

Bucket

Volume (L)

Bucket

Width (mm)

Bucket

Pitch (mm)

Bucket

Speed (m/s)

Max. Lifting

Height (m)

NE15 15 40 2.5 250 203 0.5 35
NE30 32 55 7.8 300 305 50
NE50 60 60 15.7 300 305 45
NE100 110 70 35 400 400 45
NE150 170 90 52.2 600 400 45
NE200 210 100 84.6 600 500 40
NE300 320 125 127.5 600 500 40
NE400 380 130 182.5 700 600 40
NE500 470 140 260.9 700 700 30
NE600 600 150 330.2 700 700 30
NE800 800 165 501.8 800 800 30

Turntable And Motor For Display Stands

Turntable And Motor For Display Stands

Rotating Turntable Display Stand with LED,POP Display Wobbler for Supermarket,360 Degree Rotating Display

AST Industry Co.,LTD , https://www.astsoundchip.com