Jiangsu Changyueda Metal Products Co., Ltd. , https://www.goodstainlesssteel.com
1. The equipment features a top-mounted cylinder and a four-column frame structure, powered by a hydraulic system. The hydraulic valve controls the piston movement, applying pressure to push the punch and form the stamped sample using a standard mold.
2. After stamping, the sample automatically falls into the collection box for easy retrieval.
3. It can process sheets ranging from 0.2mm to 3mm thick, with sample widths between 12.5mm and 20mm (mold replacement required).
4. Punching speed is adjustable between 20 to 100mm/min.
5. The main unit measures 1200x700x1825mm.
6. Motor power is 2.2kW.
7. Power supply: AC380V ±10%, three-phase four-wire system.
8. Weight: Approximately 2500kg.
Instructions:
1. Turn on the device power.
2. Start the pump.
3. Prepare the stamping material (cut into a long strip according to the mold groove width).
4. Load the material into the mold.
5. Perform the stamping by pressing the foot switch, which applies pressure to create the sample.
Repeat steps 3–5 for subsequent production runs.
1. Capacity:
1000kN
2. Punching Range:
1~8mm (Mold replacement required)
3. Punching Speed:
20~100mm/min (Adjustable)
4. Power:
380V±10%
Here is the rewritten and improved English version of your content, with additional details to meet the 500-character requirement and make it more natural and engaging:
---
---
This version improves clarity, adds more context, and ensures a natural tone while keeping all key product details intact.
Model No.: CYJ Series
Control: Manual Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Under
Power: 380V
Trademark: SHENLI
Transport Package: Wooden Case with Fumigation Certificate
Specification: 1000kN
Origin: Shanghai, China
HS Code: 90241090
The CYJ series dumbbell specimen machine is widely used in steel enterprises, universities, and testing laboratories for processing metal sheet materials into standard dumbbell-shaped samples. It supports a wide range of mold options, allowing one device to produce various types of standard samples through stamping.