PLC Full Automatic Diamond Mesh Machine

Model NO.: KY-4000
Trademark: KAIYE
Specification: ISO/ SGS
Origin: He Bei an Ping
HS Code: 846330000

Full Automatic  chain link fence machine
 
Characteristics and Uses:
 
Our automatic diamond mesh machine applies technical double wire mesh forming principle of Germany that produce high quality mesh panel with good production efficiency.
 
It uses reasonable design,microcomputer control and electro mechnical intergration to complete working procedures of spining,shearing,mesh winding and lock seaming automatically.
 
 
Technical Description
 
Chain link machine for manufacturing chain link fences of different sizes. The wire is taken in from the payoff stand and passed through the dies where the DIAMOND SIZE takes place. Different gap sizes. After passing from the die the diamond pattern wire is automatically thrown on the winding shaft in the stitching process. Once the stitching is complete the woven is manually glided down to enable the next stitch to take place.
     
 
The chain link is automatically wound to form rolls when the desired length is manufactured.
The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
One side or both sides of the end of net hole is twisted or with burr in edge.
Use compacting machine to make it into rolls.
 
 
Suitable wire to the machine:
 
High-quality low-carbon steel wire ,Galvanized steel wire ,Stainless steel wire ,Aluminum alloy wire,Aluminum-clad steel wire.
 
Function:
Chain Link Fencing is extensively used as fences for playground and gardens,super highway,railway,airport,port,residence,etc.


 

 Diameter
 2-4mm                  
 Mesh width  600-4000mm
 Output  80-120m²/h
 Dimension  6.5×4.5×2.5m
 Mesh Opening Size  40-80mm
 Weight  3.5T
 Rated Power  7.5KW




Reasons for Choosing Us:


1. Ours machine 12 months free warranty.
 
2. We will response within 24 hours of your question.
 
3. Competitive price and high quality.
 
4. Near to Tianjin port.

5. ISO9001 certification.
 
6. We can train staff for you.
 
The key is we can according to the requirements of the guests production machinery (such as parameters, voltage, power, color).




Payment term:
 
1.30% T/T in advance,The balance against the copy of the B/L.
 
2.L/C is also acceptable.

3.As per your special requirements which are also welcome to discuss.


    
 


We can according to your requirements production machinery
 
If you have any interest in wire mesh fence panel welding machine or other wire mesh machine products,please feel free to contact with us.

Oxygen Generator is a gaseous oxygen generator producing oxygen from air. It has features of easy installation, simple operation, automatic operation and energy-saving. It just need electricity to start running. It uses PSA technology, its progress is like this: compressed air is supplied by Air Compressor. Compressed air is used as raw material, after treatment to get rid of water, dust, oil mist,etc, compressed air goes into two adsorption towers, the nitrogen is adsorbed inside the tower, the oxygen goes out from the top, then goes into an oxygen buffer tank. After pressure regulation, flow rate adjustment, then the produced oxygen goes into using point for various applications.

Oxygen Generator

Oxygen Generator, Oxygen Plant, Oxygen Concentrator

Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com