Two-dimensional Movement Mixer The two-dimensional Mixer is mainly composed of three parts: drum, swing frame and frame. The rotating drum is mounted on the swing frame, supported by four rollers and positioned axially by two retaining wheels. Among the four supporting rollers, two transmission wheels are dragged by the rotating power system to make the rotating drum rotate. The swing frame is driven by a set of crank-swing-rod mechanisms, the crank-swing-rod mechanism is on the frame, and the swing frame is supported on the frame by a bearing assembly. Two-Dimensional Movement Mixer,Two Dimensional Motion Mixer,Motion Mixer Machine For Raw Material,Motion Mixer Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com
Twin Parallel Screw For PE Extrusion
Specification:
Diameter: Φ 45mm-Φ 200mm
L/D ratio: 16-35
Technical Information
Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly
Experienced manufacture, we will be the best choice.