1, Â Â Â Â Â Â Â Â After the ball mill is inspected and repaired according to the equipment maintenance system, it can be delivered for use.
2, Â Â Â Â Â Â Â Â Before driving, you should eliminate surrounding debris, check whether the bolts in various parts are loose, whether the belt conveyor and the feeder are good, and the lubrication of gears, hollow shafts, reducers and motors.
3,         During the overhaul, the “maintenance card†must be hung up. When the inspection is completed, the “maintenance card†can be taken off to prevent the accidental operation from closing the wounded. When installing the lining, reliable measures should be taken to prevent the person from falling off.
4, Â Â Â Â Â Â Â Â If the machine is stopped for more than half an hour, the ball mill should be manually cranked before starting to make the agglomerated pulp loose and reduce the impact load when the equipment starts.
5, Â Â Â Â Â Â Â Â Check whether the water valve, the mining pipe and the tank are unblocked, and there are no drops or leaks in all parts.
6, Â Â Â Â Â Â Â Â Operate in strict accordance with the order of opening and parking. When starting the device, press the start button with one hand, press the stop button with one hand, see the running part and the ammeter pointer, listen to the sound, and immediately stop the abnormal situation. Check and eliminate the fault before driving. When stopping, stop the mine first, treat the cyclone back to the sand, then stop the cyclone, pull down the main switch (there is no notice of power failure), and hang the "maintenance card".
7, Â Â Â Â Â Â Â Â During operation, always check the lubrication of each lubrication point, the tightness of the bolts and the wear of the components.
8, Â Â Â Â Â Â Â Â When operating, no one should be close to the body and cross the safety fence and protection net. The safety device must not be removed at will.
9, Â Â Â Â Â Â Â Â When injecting oil and inspecting the site, stand in a safe place and do not touch the rotating part of any part of the body.
10. Â Â If foreign matter or slag falls into the gears, stop it.
Mining Loader
Mining Loader,Underground Mining Loader,Loaders For Mining,Wheel Loaders For Minging
Taian zhengtai construction machinery Co., Ltd , https://www.taztmachine.com