Road Machinery Equipment is the main equipment for the construction of highways, urban roads, airports and port terminals.
product:Asphalt Mixing Plant,Asphalt Mixers,Wet mixing plant, Wet mix plant , Concrete Mixer, Concrete mixing plant.
Asphalt mixing plant,Asphalt mixers are used for mixing asphalt mixture,which is integrated with excellence of similar products within and outside our nation, such as accurate weighing, equal mixing, well dust removing, etc. Its working theory is as follows: firstly it heats stones and asphalt to a definite temperature, then mixes the stones, asphalt, powders, additives together at a prescribed proportion, and finally produces the black mixture used for asphalt road. It is widely applied into the construction of road, port deck, city road,squares,airport etc.
Wet mixing plant and Wet Mix Plant are featured with advanced structure, aggregates are weighed by belted electronic balance, filler will be weighed by electronic screw balance, water will be weighed by frequency conversion comparison; all the motors equipped are frequency conversion timing, and the plant is also module design, automatic control, accurate weighing and better mobility.it`s also applied into construction for road basic layer of different kinds of grade.
Concrete mixer and Concrete mixing plant is a kind of construction material production equipment, which is made up of mixer, material weighing system, material conveying and supply system, material storage system, control system and other affiliated instruments. Its working principle is mixing cement with different sizes of aggregates, lime powder and coal ash together, finally producing the concrete, which can be used as wall material for construction of water conservancy project, electric power project and bridge projects etc.
Road Machinery Equipment Drum Asphalt Mixing Plant,Drum Asphalt Mixing Plants Prices,Stationary Asphalt Plants,Batch Asphalt Mixing Plants Henan Chengjing Mechanical Electrical Equipment Company , http://www.asphalt-equipments.com
The structural feature of the ULTRIX 800RT is that the top end of the rotary cutter is facing downwards, that is, the vertical MC is placed on the upper side of the machine. Like the stage of the vertical rotary table, the rotating device of the disc-shaped stage for fixing the workpiece is set on the machine tool. Lower side. Such a disc-shaped stage is disposed on a device having a cradle-like "stage" which enables tilting of the disc-shaped stage.
According to this configuration, the main axis on the MC side can be moved in three axial directions such as the X-axis in the lateral direction, the Y-axis in the front-rear direction, and the Z-axis in the vertical direction. The stage side is provided with a C-axis indicating the rotation of the disk-shaped stage, and an A-axis for controlling the machined surface by tilting the cradle-like "stage". In other words, the ULTRIX 800RT is a 5-axis composite machine.
In the past, customers who used the two machines of MC and rotary table to cut workpieces now only need to use a new compound machine. As a result, space and manpower can be saved, and the cost reduction effect can be achieved accordingly. In addition, since the workpiece machining can be completed in a single fixing, the operation time is shortened, and the production time can be shortened.
The company has locked its development targets on 5-axis composite machines for machine tools. “There are a lot of competitors in the ordinary 3-axis MC, so we are ready to compete with the processing flexibility of the machine tool.â€
Breton, Italy, developed the ULTRAX 800RT, a multi-functional machine for cutting workpiece flexibility, and presented it at the 2005 European Machine Tool Show (EMO 2005), which opened in Hanover, Germany on September 14, 2005. The machine combines the functions of a machining center (MC) and a rotary table to process not only complex-shaped workpieces such as turbine blades used on aircraft, but also for cutting automotive parts and molds. The price is 550,000 euros.