Why don't you use plastic barrel oil?

In the tanker field, the friends of the car owners can all see that the tanker is generally made of sheet metal, or made of glass fiber reinforced plastic, plastics and other materials. Some owners will question: Why do not use plastic barrel oil? Isn't that more convenient?

Professionals pointed out that: the tanker is a dangerous goods transport vehicle, the tank requires sufficient strength, and the tank body is equipped with anti-shock plate, the tank body is equipped with manholes, liquid valve, etc., some tanks also need to keep warm , Configure the flowmeter and so on. We still don't know the principle? Today, Xiao Bian came to the public to answer the question. What is the reason why oil trucks do not use plastic barrels of oil?

Although the plastic bucket is a convenient container, if we put gasoline into a plastic bucket, during the transportation process, petrol and plastic buckets constantly rub against each other, causing friction and heat. When the friction reaches a certain level, it will cause the plastic bucket to be charged to generate sparks. Afterwards, sparks will ignite gasoline and cause fires.

This is not enough, because when the tanker is driving, the petrol in the tank is charged with the friction and electrification of the car. If the static electricity is not taken away in time, an explosion will occur if the discharge occurs. therefore. Also, install electrostatic belts or drag down the subway chain behind the car. Electrostatic belts or drag the chain to connect the surface of the tank to the ground. The static electricity on the surface of the tank can be introduced into the ground so that the charge in the tank can be neutralized. Sparks caused by the discharge cause the tank to explode.

The oil tanker is a kind of dangerous goods transporter, so the safety issue is the most important. Special attention must be paid to the safe operation of the tanker and the use of plastic barrel oil.

Cooling tower fill is one of the most important components for exchange of gas  and water in cooling tower.It is the major 

parts to improve the efficiency of cooling tower and make sure the economy and safe operation.This kind of  PVC  Cooling Tower Fill pack with the advanced technical, long lifetime, low resistance, light weight.During the service, the fill can increase the water flow process. It is widely used in square cooling tower.