Fuel dispenser pouring electrostatic device

There are two kinds of static electricity devices for refuelling vehicles. The first one is the ride zone. The ride zone is located on the corner of the tank at the rear of the small tanker, and is often kept in contact with the ground. In this way, the static electricity generated by impact and vibration of the oil in the small and medium-sized refueling tank can be prevented, or the static electricity generated during the operation of the refueling machine and the generator can be directly introduced into the ground to prevent accidents due to static electricity. The second type is that the conductive rod is generally fixed on the frame of the small refueling vehicle. When the small refueling vehicle refuels or discharges the fluid, the conductive rod must be pulled out and inserted into the wet ground. This fundamentally prevents The friction caused by tanker fuel during loading, the same wet ground, is a good medium and plays a very good conductive role. Especially in the oil depot, care must be taken not to bring flammable materials or items that are prone to sparks into the oil depot, so that the oil will not be ignited by these tiny flames, causing serious accidents.

Refueling car common minor problems, teach you how to solve

People use and maintain in the tanker, there are some false beliefs, false beliefs in the tanker manufacturing, repair, trailing, lack of these low-level testing means the formation of a long era. Wrongful convictions sometimes seem to be correct, not actual situations, great harm will be the loss of vehicles, personal safety is threatened, and thus more likely to be buried accident risk, or cause vehicle performance, accelerated wear, shortened life expectancy, etc. Wait.

1 Remove Engine Thermostat Blind

If the engine temperature is high due to the blind removal of the thermostat, the coolant can be cycled in more suitable work, it is impossible to adjust the cooling intensity, it is difficult to ensure the engine temperature, but at low temperatures that often make the engine work, resulting in reduced Engine power, accelerated wear, increased fuel consumption. If the engine thermostat fails to repair or replace, the engine temperature is higher, it should repair other parts of the cooling system and it is impossible to remove the thermostat.

2, engine temperature is low fear high fear

Some people think that driving engine temperature is low fear high fear. In fact, it is also a great danger that the engine temperature is low. It should be used according to the instructions provided for normal driving temperature, in order to ensure the life of the engine.

3, pump fan belt tension, good belt tension is not possible. Not only does it stretch the belt too tightly or break it, shortening the life of the belt, and due to excessive tension, the generator shaft, the pump shaft and the bearing that is damaged early in the bending are deformed. The tanker engine fan drive belt tightly fits the technical requirements, 10-15mm is the normal deflection of the proper belt assembly.

4, heating the engine to laziness

With idle temperatures, due to the low speed, the oil pump cannot work in dry or half-state friction.

In summer, the owner should be diligent in daily inspection and maintenance of the vehicle.
In the summer, heavy rains come at any time. The safety of driving in rainy days requires special attention:
First, driving is to drive steadily;
Second, to avoid tire pressure is too low, the rain after the car due to multiple irrigation may affect the performance of certain parts of the car, serious can lead to the car can not start properly.
Rainy days can easily lead to flooding of headlights. If you find that there is water mist in the headlights, you can turn on the headlights and turn on the high-beam lights to see if the water mist in the headlights disappears after 10 minutes. If it disappears completely after one hour, do not worry if it disappears. However, if there is water fog, it is necessary to go to a professional service station for processing.