Effects of deterioration of oil in bulk feed trucks

After the oil of the bulk feed truck has been used for a period of time, due to some of its own impurities caused by the operation of the machinery and external contamination, some of the parts that are operated will have worn out metal shavings, and When the parts are subjected to some corrosive effects, they form metal salts that eventually deteriorate the oil in the bulk feed carrier. Some drivers are usually busy when transporting goods, and the knowledge of this piece is not enough, then it is prone to oil deterioration and accelerated aging, resulting in deterioration of the oil of bulk feed carriers. Can not get a good lubrication performance, which will accelerate the vehicle parts of the various parts of the degree of wear. Therefore, every driver of a bulk feed carrier should have a better understanding of and knowledge about the proper use of vehicle oil, and he must also be able to change the oil.

散装饲料运输车机油变质后的影响.jpg

1, after a long period of driving the bulk feed carrier, you can remove the oil, drop it and rub it in your hands. If there is some abnormal taste, then it proves that the oil has gone bad.

2. Take a few drops of the extracted oil to the litmus test paper, and then carefully observe some changes in the test paper. If the litmus paper has turned red, then you need to replace the oil. Now.

3. If the bulk feed truck is in use, there are obvious lubrication conditions or there are many bubbles, and the foam will not disappear so easily, it proves that the oil in the bulk feed truck is already With the incorporation of water, the vehicle's engine oil deteriorated.

Usually when driving a bulk feed carrier, it is also possible to determine whether the engine oil has deteriorated through the degree of oil consumption. If the oil is mixed with water or diesel, the degree of consumption of the oil will increase or decrease. The emergence of these problems proves that the oil of the bulk feed truck has deteriorated, and it is necessary to replace the new oil immediately. .


PVC Electrical Tape

PVC Electrical Tape is made from PVC as the backing material,which are coated with rubber Pressure-sensitive adhesive.

They are resistant to high voltage, fire and weather, commonly designed for connecting separated electrical wires for electrical insulating and protection purposes


1) Made from PVC as backing material
2) Coated with rubber pressure-sensitive adhesive
3) Adhesive: Rubber
4)Thickness: 0.10mm-0.195mm
5)Peeling strength: more than 1.6/1.8 (N/cm)
6)Tensile: more than 16-28N/cm
7)Tensile strength: 160%
8)Voltage broke down: 6.0kv, 8.0kv


Excellent viscosity and flexibility, withstand voltage, burn-resistance, cold-resistance, high-tensile, suitable for insulation wrapping wire, cable and automobile line bunch.
Length and width available according to customers request
Different backing material is available, such as PVC, Kraft, Cloth etc.
Different size and colors is available.


Black Electrical Tape,Electrical Tape,Pvc Electrical Insulation Tape ,Pvc Insulation Tape

Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com