Five quiz for bulk cement trucks

I. Why does the Shanxi Auto Delong Bulk Cement Truck automatically increase its speed when discharging?

Because the position of the discharge port of the cement truck is relatively high, in addition to rotating the cement during the discharge, the cement must be raised to a height. So it is more laborious, the engine will automatically increase the speed to increase.

2. What is the difference between a dry-mixed mortar carrier and an ordinary bulk cement carrier?

1, transport media:

The former is suitable for the transport of granular ready-mixed mortar.

The latter is applicable to the bulk transportation of fly ash, cement, lime powder, ore powder, granular alkali, and other dry materials with a particle diameter of no more than 0.1 mm.

2, unloading method:

The former: horizontal fluidized bed gas dipping material.

The latter: Hydraulic lift gas suspension unloading.

Third, bulk cement sprinkled on the car paint above what is the damage?

First of all, don't rub the bulk cement onto the car, wash it off with water, or wash it in the car wash, as long as you don't have the paint off.

Fourth, how to clear bulk cement trucks ?

Clearance must be remembered when a warehouse and a warehouse, first clearing from the last position, the time to keep the butterfly valve to keep open and close. After the last position is finished, the two valves of the last position, the intake and the discharge of ash, shall be closed at the same time, and all the sources of gas shall be unloaded before the two positions, and then the intermediate positions shall be unloaded, and then the intermediate positions shall be unloaded and discharged. The valves are closed at the same time, all sources are unloaded and the front side is unloaded until it is cleared.

5. Can bulk cement trucks transport dry mortar?

Bulk cement trucks can transport dry mortar, but there will be segregation problems affecting the quality of mortar.