What problems should be paid attention to in the accident wrecker?

For the wrecker, I believe many drivers are familiar with it. In fact, when you see this name, you believe that everyone already understands that it is used to clean up accident vehicles or road obstacles. Its main task is to clean up traffic-blocking vehicles or obstacles to areas where traffic is not hindered. .

With the development of domestic transportation industry and the increase in the number of private cars, the traffic-removing vehicles in various regions are now increasing. The common types of obstacle-removing vehicles are mainly divided into flat-plate type, rotary type, standard type, and lift type. , high-altitude trucks, general-purpose vehicles, etc. According to different trailer removal targets, targeted selection can be made.

However, there are many problems in the specific operation of the accident wrecker that require extra attention, otherwise it will lead to the occurrence of a second accident. Before the wrecker enters the site, a detailed understanding of the operating object should be given, and the appropriate vehicle type should be selected to the site for construction work. After arriving at the site, you must not blindly carry out operations. You should understand the specific vehicle information and traffic conditions, find the simplest and quickest solution, and then start troubleshooting according to the command.

During the process of towing the vehicle, it is necessary to use a supporting arm for dragging, and it should be noted that the link portion and the length of the trailing arm should be mastered, and the chain rope and the like must be fixed to avoid changes in the road conditions during the trailer. It was the accident vehicle and the wrecker that detached and caused a second accident. However, the load weight of the trailing arm should also be fully considered so as not to damage the trailing arm. In addition, the operation of booms, outriggers, support arms, and other moving parts should be observed at all times in the process of the trailer. If the operating range of these moving parts is exceeded, it is necessary to consider suspending the trailer and remember how to handle it.

Finally, there is one point that we must specifically look at. That is, the accident wrecker cannot drive too fast during the trailer. It should always adjust the speed according to changes in road conditions, ensure constant and constant speed, and avoid emergency braking, if it is under high temperature conditions. For continuous construction work, the oil temperature should be checked at any time to prevent the oil temperature from being too high, causing increased wear between auto parts and affecting the normal operation of the vehicle.