First, the ceramic tile must be fully immersed in the tiles before the shop has been fully immersed, so mainly to allow the tiles in the pores absorb water, so when the paving is not easy to empty drums, shedding phenomenon, if the tiles Without soaking directly on the wall, it is very likely that the tiles will directly absorb the moisture in the cement. When it reaches a certain degree, the tiles will even crack, which will cause a lot of waste of tiles, and the quality of the tiles is not good.
Second, choose high quality cement sand
In order to have a good quality tile, we must choose high-quality cement sand, so that the tile will be tight; the point of choosing cement is to see if it has QS certification, and see if it has a shelf life, if After the shelf life, it is best not to buy; sand is the best choice for river sand, river sand contains more water, paste the effect will be better.
Third, the best place to cut the tile on the corner
The cut tiles always look a bit uneven, so it is best to cut the tiles in the corner. This position can be sealed with a sealant at the end, and will not affect the decoration of the house. If placed in a conspicuous place under the window, it will affect the appearance of the house.
Fourth, the location of the first brick must be selected
The position of the first tile determines the position of the tile in the entire wall, so the position of the first tile must be selected. If the position of the first tile is wrong, then the entire wall tile will collapse.
Fifth, we must do the wall pressure
The wall pressure is the wall tile to be above the floor tile. The advantage of this is that it does not contain water. The water drops in the wall will flow along the wall tile to the surface of the floor tile. It is easy to clean. Because this is more troublesome, some bricklayers find all kinds of Reasons are not willing to do, this is the decoration of the owners must supervise the bricklayers, so that they can do this project.
Other Gate valve
Wedge Gate Valve,Rising Stem Gate Valve,Knife Gate Valve,Stem Gate Valve
Zhongfang Valve Xichuan Manufacturing Co., Ltd. , http://www.twt-zj.com