Continuous casting slabs or primary rolling slabs are used as raw materials, heated by a stepping furnace, and dephosphorized by high-pressure water, and then enter the roughing mill. The rough rolling material is cut through the head, tail, and then into the finishing mill, and computer-controlled rolling is carried out. After the final rolling, it will go through laminar cooling (computer-controlled cooling rate) and take-up by the coiler to become a straight hair coil. The head and tail of straight hair curls tend to be tongue-shaped and fish-tailed, with poor thickness and width accuracy, and often have wavy, folded, tower-shaped and other defects on the edges. The coil is heavier and the inner diameter of the steel coil is 760mm. (Generally used in the pipe-making industry.) After straightening the hair through the cutting head, tail cutting, trimming and multi-pass straightening and smoothing finishing lines, and then cutting or re-rolling, it becomes: hot rolling steel plates, flat hot rolled steel coils, slitting tapes and other products. If the hot-rolled finishing coil is pickled to remove scale and coated with oil, it will become a hot-rolled pickled coil.
HRC Steel Coil,Cold Rolled Steel Coil,Hot Rolled Steel Coil,Hot Rolled Steel Coils Shandong Guanzhou Iron and Steel Group Co., Ltd. , https://www.guanzhousteel.com
Here is a rewritten and improved version of the provided content in English, with additional context and details to make it more natural and comprehensive, exceeding 500 characters:
---
**Steel Market Update - April 5, 2025**
Below is the latest pricing for various steel products as reported today. Prices are listed in Yuan per ton, along with changes compared to yesterday and last week.
- **General Line (Φ6.5/8mm Q235)**
- Handan Steel: ¥4,300 (0 / +40)
- New Gold: ¥4,350 (0 / +50)
- Licheng Taihang: ¥4,310 (0 / +40)
- **High Line (Φ6.5/8mm Q235)**
- Handan Steel: ¥4,350 (0 / +50)
- Licheng Taihang: ¥4,310 (0 / +40)
- **Rebar (Φ12mm HRB335)**
- Handan: ¥4,450 (0 / -110)
- Emerging Cast Pipe: ¥4,540 (0 / -110)
- **Threaded Steel (Φ16-25mm HRB335)**
- Concrete: ¥4,340 (0 / 0)
- Emerging Cast Pipe: ¥4,340 (0 / 0)
- **Rebar (Φ16-28mm HRB335)**
- Licheng Taihang: ¥4,400 (0 / 0)
- **Plate Screw (Φ10mm HRB400)**
- Licheng Taihang: ¥4,500 (0 / +150)
- **Hot Rolled Sheets**
- 1.8*1250*C Q235: ¥5,360 (0 / +160)
- 2.0*1500*C Q235: ¥5,150 (0 / +130
- 2.5*1500*C Q235: ¥4,900 (0 / -20)
- 2.75*1500*C Q235: ¥4,750 (0 / -150)
- 3.0*1500*C Q235: ¥4,730 (0 / -20)
- 4.0-4.75*1500*C Q235: ¥4,550 (0 / -130)
- 5.0-6.0*1500*C Q235: ¥4,550 (0 / -130)
- 7.2-9.8*1500*C Q235: ¥4,550 (0 / -130)
- 4.5-10.0*1500*C Q235: ¥4,510 (0 / -160)
- **Puzhong Plate**
- 8.0mm Q235: ¥5,540 (0 / +180)
- 10.0mm Q235: ¥5,330 (0 / +210)
- 12.0mm Q235: ¥5,140 (0 / +230)
- 14-25mm Q235: ¥5,030 (0 / +150)
- 14-25mm Q235 (Wenfeng): ¥4,910 (0 / +110)
- 14-25mm Q235 (Puyang): ¥5,000 (0 / +130)
- 14-25mm Q235 (Yuanbaoshan): ¥4,900 (0 / +100)
- **Low Alloy Plate (8mm Q345)**
- Handan Steel: ¥5,660 (0 / +130)
- **Angle Steel (50*5/6m Q235)**
- Ansteel: ¥4,650 (0 / +50)
- **Channel & I-beam**
- 12# Channel: ¥4,500 (0 / +50)
- 20#/8m Channel: ¥4,600 (0 / +100
- 12# I-beam: ¥4,350 (0 / 0)
- 25b# I-beam: ¥4,650 (0 / 0)
- 32# I-beam: ¥4,650 (0 / 0)
- **Hot-Rolled Strip Steel**
- 3.5mm and above *735*C Q235: ¥4,430 (+30 / +80)
- 5.5mm *685*C Q235: ¥4,430 (+30 / +80)
- 3.0mm *(685-735)*C Q195: ¥4,460 (+30 / +80)
- 3.5mm *(480-570)*C Q195: ¥4,430 (+30 / +80)
- 3.75mm *520*C Q235: ¥4,430 (+30 / +80)
- 3.0mm *(480-570)*C Q235: ¥4,460 (+30 / +80)
Overall, prices remain stable across most products, with slight fluctuations in hot rolled coils and plates. Buyers are advised to monitor market trends closely for potential adjustments.
---
Let me know if you'd like this formatted as a report or email.